VVDI MB Machine BGA Mercedes Key Programmer

The VVDI MB BGA Mercedes Key Programmer from Xhorse is the latest key programmer for Mercedes Benz. It will allow you to program new keys to your customer's Mercedes without the need for soldering. It features frequent online updates to support Mercedes Benz keys. It can read passwords and prepare new keys via IR.

The programmer is mainly used for key reading and writing, EIS tools, password calculations, key file preparations, ESL tools, ECU/Gearbox renewal, and other special functions.

Includes the original Xhorse VVDI MB BGA Tool Mercedes Benz Key Programmer BGA Calculator. Features frequent online updates, reading Mercedes passwords, preparing a new key/remote via IR, and more necessary functions for Benz key programming.

VVDI MB BGA Mercedes Key Programmer Features:

• Supports BE key, read password and prepare new key via IR
• NEC V051,V057 supports password retrieval on-board (no EEPROM needed)
• On-board writing and erasing to all NEC keys (no EEPROM needed)
• Fast password calculations for BGA and NEC keys (include 51,57 version)
• Writes & renews EIS (EZS) and ELV (ESL)
• Generates key file (must have Internet access)
• Unlocks ELV (ESL)

Includes:

• VVDI-MB Base Unit
• OBD2 Cable with K-Line Connector
• IR Reader
• USB Cable
• NEC Adapter 1
• NEC Adapter 2
• NEC Adapter Base PCB
• VVDI BE Key (XNBZ01 XNBZO1)

Support Documents:

• User Manual (Version 1.5, 05/29/2016)
• VVDI MB Overview (Version 1.3, 02/26/2016)

Programming W203 When All Keys Are Lost:

STEP 1:
READ EIS KEY PASSWORD
• Connect the VVDI MB to your laptop
• Open the VVDI MB BGA software
• Select EIS Tools
• Select IR in EIS Function
• Select Chassis W203,463,639 (K)
• Insert the IR adapter (blue) into the ignition (if already inserted, remove it and reinsert it again). Keep it there for 28 seconds.
• The VVDI BGA button status should show Reading Data Success. EIS is normal. If the software asks if you want to read the password via IR, click Yes to continue. Reading the password via IR takes around 1-4 minutes.
• Select the key used position, Read EIS key pass success.
• Select Save EIS Data
• Press OK to save HC05 format file

STEP 2:
PREPARE THE KEY FILE
• Select Prepare Key File function
• Click on Load EIS File
• Upload EIS data you just saved
• Select one used key option: Key 4 and v051
• Select Prepare Key File
• Save key file

STEP 3: READ WRITE KEY
• Select Read Write Key
• Place your smart key onto the VVDI MB tool
• Click the Identification key button
• Check unused key status
• Select Load Key file
• Open key file you just saved
• Show Key EEPROM data
• Click on Write
• Success message appears
• Click on the Identification Key button again
• Check the key number
• Remove both keys from VVDI MB and EIS
• Insert IR key into EIS
• Switch on and off to check
• Select IES Tools in software
• Select IR
• Select Chassis
• Select Read EIS data and password
• Insert the IR adapter (blue) into the ignition (if already inserted, remove it and reinsert it again). Keep it there for 28 seconds.
• New key has been programmed successfully!